High Winds
High Winds | Metal Roofing | Roofing | Winfield
In Winfield, storms can barrel across the valley without warning, turning loose shingles into costly leaks overnight. HEP’s high-winds team installs metal roofing engineered to shrug off gusts that would rip traditional materials to shreds. Our interlocking steel panels are fastened with hurricane-grade clips and a specialized underlayment, creating a continuous shield that resists wind uplift while reflecting radiant heat. The result is a roof that looks sharp, lowers energy bills, and stands firm long after the weather alerts fade.
From the first on-site inspection to the final walk-through, you’ll work with local experts who understand both mountain microclimates and city permit lines. We back every project with industry-leading warranties and a responsive service crew, so you can spend less time worrying about the next storm and more time enjoying the peace of mind that comes from owning Winfield’s toughest metal roofing solution.
FAQs
1. Why is metal roofing recommended for high-wind areas like Winfield?
Metal panels lock together more securely than individual asphalt shingles, creating a continuous, rigid surface that wind can’t easily lift. High-grade steel or aluminum panels are tested under UL 580 and UL 1897 uplift standards and are commonly rated for hurricane-force gusts. In Winfield, where spring and summer storms routinely push 60–90 mph, a properly fastened metal roof offers proven protection against shingle blow-offs, water intrusion, and costly emergency repairs.
2. What wind speeds can your metal roofing systems withstand?
Our standing-seam and metal shingle systems are engineered to resist uplift pressures equivalent to sustained winds of 140 mph and gusts exceeding 170 mph, depending on panel profile and fastening method. These ratings meet or exceed the International Residential Code (IRC) requirements for Cowley County and have third-party verification through Miami-Dade, UL, or ASTM testing. We match the panel type and fastening schedule to your home’s exact wind-zone calculations to ensure full code compliance and maximum peace of mind.
3. How does installation differ from standard shingles to achieve high-wind performance?
Instead of relying on surface nailing, we use concealed clips or screws that penetrate the roof deck and structural rafters, anchoring each panel at multiple points. Seams are mechanically crimped or snapped to create a watertight, interlocked surface. A high-temp synthetic underlayment adds a secondary moisture barrier, and foam closure strips are placed at panel edges and ridges to block driven rain. Edge flashings are fastened every 6–8 inches, far tighter than the 12-inch spacing typical for shingles, which prevents wind from getting under the panels and starting uplift.
4. Will a metal roof be noisy during Winfield’s hail and wind storms?
No. Modern metal roofing is installed over solid plywood or OSB decking with an underlayment and often attic insulation beneath. These layers absorb vibration and sound, so interior noise levels are comparable to—or quieter than—those under an asphalt roof. Many customers report that wind-driven rain actually sounds softer after their metal upgrade because there are no loose tabs rattling in the breeze.
5. Is a metal roof more expensive, and does it pay off in the long run?
Up-front, a high-quality metal roof can cost 1.5–2 times more than architectural shingles. However, it lasts 40–70 years versus 15–20 for shingles, eliminating at least one full replacement cycle. Its interlocking design reduces storm-damage claims, which may lower homeowner’s insurance premiums by 20–35 % in Kansas. The reflective coatings on our panels also cut summer cooling bills by up to 25 %. When you factor in energy savings, reduced maintenance, and higher resale value, metal is frequently the most economical choice over the life of the home.
6. Can a metal roof be installed over existing shingles on my Winfield home?
In many cases, yes. Because metal panels weigh 50–60 % less than asphalt, they can often be installed directly over a single layer of sound shingles, saving tear-off costs and keeping debris out of landfills. We first inspect for moisture damage, deck rot, and local code limits (Cowley County permits maximum two roofing layers). If conditions are suitable, we add a slip-sheet or underlayment, install new flashings, and fasten panels through the existing roof into structural decking. If the old roof is saturated, uneven, or already double-layered, we’ll recommend a complete tear-off to ensure long-term performance.