High Winds
High Winds | Metal Roofing | Roofing | Tullahoma
When the gusts off the Highland Rim start howling, homeowners in Tullahoma trust HEP to keep every shingle—and family—secure. Our metal roofing systems are engineered specifically for high-wind zones, interlocking panels that shrug off uplift while their baked-on finishes laugh at rust, hail, and blistering UV rays. Because each roof is custom-measured and precision-built, you get a streamlined profile that looks as good on a historic cottage near Downtown as it does on a modern lake-side retreat.
Beyond raw strength, metal roofing delivers year-round advantages: cooler attics in summer, lower energy bills in winter, and a life expectancy that can outlast three traditional roofs. Backed by HEP’s local crews, industry-leading warranties, and 24/7 emergency response, your investment is protected long after the storm clouds pass. Ready to leave worries—and loose shingles—behind? Give our Tullahoma office a call and discover how a HEP metal roof can turn high winds into a non-issue.
FAQs
How does a metal roof perform during the high-wind events we experience in Tullahoma?
Properly engineered metal roofing is one of the most wind-resistant systems available. Panels interlock, are secured with concealed clips or screws into the structural framing, and create a continuous surface that resists uplift. Independent lab tests and real-world hurricane performance show modern standing-seam and through-fastened metal roofs can remain intact in winds well above anything typically recorded in Coffee and Franklin counties.
What wind-speed ratings do your metal roofing products carry?
Our primary standing-seam panels are tested to UL 580 Class 90 and ASTM E1592 standards and are rated for wind speeds up to 150 mph, exceeding the 2021 International Residential Code requirement for Tullahoma’s 120-mph design wind-speed zone. For customers who want extra protection, we also offer Miami-Dade NOA-approved profiles that meet 180-mph ultimate wind speeds when installed over a solid deck with the specified clip spacing.
Can installing a wind-rated metal roof lower my homeowners-insurance premiums?
Yes. Because metal roofs have superior wind resistance, fire resistance, and hail impact ratings, many insurance carriers give premium discounts—often 5 %–15 %—for qualified systems. After installation we provide documentation of the panel’s UL and ASTM test data and the wind-uplift engineering letter your insurer may request. Check with your agent beforehand to verify the exact savings available in Tullahoma.
What installation practices ensure my metal roof stays put in severe winds?
Wind performance starts with the substrate. We attach panels over 5⁄8-in. plywood or 1×4 purlins using stainless or corrosion-resistant fasteners set to the manufacturer’s torque specs. Standing-seam systems get floating clips that allow thermal movement yet lock the seam every 12–16 in. Ridge, eave, and hip trim pieces are secured with butyl sealant tape and stitch screws on a 6-in. pattern to prevent wind-driven rain intrusion. All edge metal is fabricated to ANSI/SPRI ES-1 standards for tested wind uplift resistance.
Will a metal roof be noisy in high-wind storms or heavy rain?
Modern installations include high-density synthetic underlayment and sometimes a ⅜-in. sound-dampening board between the deck and panel. Combined with attic insulation, these layers absorb much of the vibration that once gave metal its "tin roof" reputation. Most homeowners report the sound is no louder than, and often quieter than, an asphalt-shingle roof during a thunderstorm.
What maintenance should I perform after a significant wind event?
Metal roofing is low maintenance, but an annual visual inspection—especially after a windstorm—is recommended. From the ground, look for displaced ridge caps, lifted edge trim, or dangling gutter extensions. If safe access is possible, clear limbs or debris that could trap moisture. Never walk on the roof if you are unsure of footing; instead, call us for a complimentary storm-damage assessment. Panels are modular, so if a fastener backs out or a piece of trim is bent, repairs are typically quick and inexpensive without replacing large roof sections.