Metal Profiles
Metal Profiles | Roof Replacement | Roofing | Kingston
Ready to trade tired shingles for a metal roof that shrugs off Kingston’s lake-effect snow and summer heat? HEP’s Metal Profiles Roofing team makes roof replacement effortless, pairing precision craftsmanship with sleek, energy-efficient steel panels that outlast conventional materials by decades. From the first on-site assessment to the final fastener, our local specialists handle every detail, ensuring your property stays protected while you carry on with daily life.
Choose from a spectrum of colours and profiles that instantly boost curb appeal while delivering superior wind resistance, fire safety, and impressive energy savings. With industry-leading warranties and a clean, courteous installation crew, you get peace of mind that your new roof is as durable as it is beautiful—built to weather Kingston’s climate for generations. Get in touch today and discover how easy it is to elevate your home or business with HEP’s signature metal roofing solutions.
FAQs
What advantages do metal profile roofs offer for homes in Kingston’s climate?
Kingston experiences heavy lake-effect snow, freeze–thaw cycles, strong summer sun and high winds off Lake Ontario. Metal profile roofing sheds snow quickly, will not absorb water or warp in freeze–thaw conditions, is rated to withstand winds of 190–200 km/h, and reflects a large portion of solar radiation, keeping attic temperatures lower in July and August. Its corrosion-resistant coatings also stand up to the area’s occasional salt-laden air and acid rain, giving homeowners a roof that won’t crack, curl or grow moss the way asphalt shingles often do.
How long can I expect a metal profile roof to last compared with traditional asphalt shingles?
While architectural asphalt shingles in Kingston typically last 15–20 years (and often less on south-facing slopes), a properly installed steel or aluminum profile roof carries a manufacturer’s warranty of 40–50 years and a projected service life of 60+ years. Because metal is non-combustible, resists UV degradation and never loses its granules, the roof generally won’t need the periodic patching, re-sealing or partial re-roofing common with shingles. This longer lifespan often offsets the higher initial cost over time.
Is my existing roof structure strong enough to support a metal profile roof?
In most cases, yes. Metal profiles are actually lighter than asphalt shingles—about 1.5 lb/ft² versus 2.5–3 lb/ft²—so the dead load on rafters and trusses is reduced. Before installation, our technicians perform a full structural assessment, verify local building code requirements (Snow Load Zone 2 for Kingston) and inspect sheathing for rot or delamination. Any damaged decking is replaced, and additional strapping or underlayment is installed where required. If you have unique structural concerns, such as cathedral ceilings or historic timber framing, we’ll provide engineering guidance at no extra cost.
Will a metal roof be noisy during rain or hail storms?
When installed over solid decking with a high-density synthetic underlayment—as required by Ontario Building Code—metal roofs are only marginally louder than asphalt and usually quieter than cedar shakes. The air space created by strapping and attic insulation further dampens sound. Many homeowners report they can’t tell the difference once the installation is complete. If enhanced acoustic control is important, we can add a sound-deadening membrane between the deck and panels for an additional 2–3 dB of noise reduction.
How energy-efficient is a metal profile roofing system?
Metal panels have high solar reflectance (SR) values—0.30–0.65—compared with dark asphalt’s 0.05–0.15. This reflectivity, coupled with the emissivity of modern Kynar 500 and SMP coatings, reduces heat gain, lowers attic temperatures by up to 10 °C and can cut summer cooling costs by 15–25 %. In winter, the low thermal mass of metal makes it quicker to shed snow, which, along with proper ventilation, minimizes ice damming. Many of our profiles are ENERGY STAR® certified and may qualify for Canada’s Greener Homes Grant when combined with additional insulation upgrades.
What is the typical cost and timeline for a metal roof replacement in Kingston?
For an average 2,000 ft² detached home with a simple gable roof, installed prices in 2024 range from $11 to $15 per square foot (taxes included), depending on panel style (agricultural rib, standing seam, or stone-coated), flashing complexity and ventilation upgrades. A tear-off and re-deck of an older cedar or double-layer shingle roof can add $1.50–$2.00/ft². Most projects are completed in 3–5 working days: Day 1—material delivery and site protection; Days 2–3—old roof removal and deck repairs; Days 3–5—panel installation, flashing and clean-up. We provide fixed-price quotes valid for 60 days and offer zero-interest financing for up to 24 months.