Standing-seam Metal
Standing-seam Metal | Roof Replacement | Roofing | Luttrell
Imagine a roof that shrugs off hail, high winds, and relentless summer heat while lending your Luttrell home a sleek, modern profile—that’s the promise of HEP’s standing-seam metal system. Precision-locked panels create continuous, watertight protection that lasts decades longer than traditional shingles, and the baked-on colors resist fading so your curb appeal stays sharp year after year. Because metal reflects solar radiation, many customers even report lower cooling bills—an upgrade that pays you back while it protects everything beneath it.
When it’s time for a roof replacement, partner with the crew that knows Luttrell weather as well as they know metal. HEP’s certified installers handle every detail, from removing old materials to the final seam, with minimal disruption to your daily routine. We back our work with robust warranties and friendly, hometown service, so you can feel confident scheduling your free on-site estimate today.
FAQs
What is a standing-seam metal roof and how is it different from other metal panels?
Standing-seam roofing is made of interlocking metal panels that have raised vertical seams (or ribs) running continuously from the ridge to the eave. The fasteners that hold the panels to the roof deck are concealed beneath the seams, so they are protected from weather and UV rays. This differs from exposed-fastener panels such as “corrugated” or “R-panel,” where the screws remain visible and are more prone to loosening or leaking over time. The hidden-fastener design of standing-seam systems gives the roof a sleeker appearance, superior water and wind resistance, and a longer service life.
How long can I expect a standing-seam metal roof to last in Luttrell’s climate?
With proper installation and minimal maintenance, a standing-seam metal roof typically lasts 50–70 years in East Tennessee’s mix of hot summers, heavy rains, and occasional winter ice. The panels we install are 24- or 26-gauge Galvalume steel with Kynar 500® or SMP paint finishes that carry 35–40-year color fade warranties. Because the fasteners are hidden, they are not exposed to moisture and UV degradation, which further extends the life of the roof compared with conventional asphalt shingles that often need replacement after 20–25 years.
Is a metal roof noisy during rain or hail storms?
When properly installed over a solid deck and high-density synthetic underlayment, a standing-seam metal roof is no louder than an asphalt shingle roof. The sheathing, underlayment, and attic insulation all absorb sound. Many homeowners in Luttrell are surprised to find their new metal roof is actually quieter than their previous roof because the panels are attached securely with concealed clips that prevent the “oil-canning” vibration you sometimes hear on older barns or pole buildings.
Do I have to tear off my existing shingles before installing a standing-seam roof?
In most cases, yes. Building codes for Union County and most insurance carriers require the removal of old shingles so that we can inspect the decking, replace any damaged wood, install proper underlayment, and attach the metal clips directly to the structure. A full tear-off eliminates excess weight, ensures the metal panels sit flat, and allows us to add an energy-efficient, high-temperature ice-and-water shield along eaves and valleys. Occasionally a single layer of shingles in good condition can be overlaid, but that is evaluated on a case-by-case basis during your free inspection.
How much does a standing-seam metal roof cost in the Luttrell area?
Pricing varies with roof size, pitch, and complexity, but most residential standing-seam installations in Luttrell range from $9 to $15 per square foot (about $900–$1,500 per roofing square). This includes tear-off, disposal, new synthetic underlayment, trim, flashing, and installation by our certified metal craftsmen. While the upfront price is higher than architectural shingles, the metal roof’s longer lifespan, reduced maintenance, and potential energy savings typically make the lifetime cost lower. We offer financing plans and can assist with insurance claims if the replacement is storm-related.
What warranties and maintenance are required after installation?
Our standing-seam systems come with a 40-year manufacturer’s paint warranty, a 25-year weathertightness warranty, and a 10-year workmanship warranty from our company. Routine maintenance is simple: keep gutters clear, trim overhanging branches, and schedule a quick inspection every 3–5 years to check sealant at penetrations. The concealed fastener design means there are no exposed screws to back out or replace, so maintenance costs are minimal compared with screw-down metal or shingles.